LD4T06P0【PDF 1/16 页】TIMER 6 DIGIT 4.0" 120VAC RED

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录987

[1页]2页 3页 4页 5页

Bulletin No. LDT-F

Drawing No. LP0634

Released 09/10

Tel +1 (717) 767-6511

Fax +1 (717) 764-0839

www.redlion.net

MODEL LD - LARGE DISPLAY TIMER AND CYCLE COUNTER

? 2.25" or 4" HIGH RED LED DIGITS

? 6-DIGIT BI-DIRECTIONAL TIMING CAPABILITY

? 5-DIGIT CYCLE COUNTING CAPABILITY

? SELECTABLE TIMER RANGES AND OPERATING MODES

? ELAPSED TIMER AND PRESET TIMER FUNCTIONALITY

? SERIAL COMMUNICATIONS (RS232 or RS485)

? PROGRAMMABLE USER INPUT

? UNIVERSALLY POWERED

US LISTED

IND. CONT. EQ.

51EB

? 5 AMP FORM C RELAY OUTPUT

? ALUMINUM NEMA 4X CASE CONSTRUCTION

GENERAL DESCRIPTION

The Large Display Timer and Cycle Counter is a versatile display that

functions as an Elapsed Timer or Preset Timer, with full-featured user

programmability. The meter includes a built-in Cycle Counter, relay output and

serial communications capability. The 6 digit displays are available in either

2.25" or 4" high red LED digits with adjustable display intensity. The 2.25" high

models are readable up to 130 feet. The 4" high models are readable up to 180

feet. Both versions are constructed of a NEMA 4X/IP65 enclosure in light

weight aluminum.

The Timer has two signal inputs and eight input operating modes. These

modes provide level active or edge triggered start/stop operation. The Timer

features 18 selectable timer ranges to cover a wide variety of timing applications.

The built-in Cycle Counter can be linked to timer operation to count timing

cycles, or function as a totally independent counter, accepting count speeds up

to 500 Hz. The display can be toggled either manually or automatically between

the Timer and Counter values.

In addition to the Timer/Counter inputs, a programmable User Input is

provided to perform a variety of meter functions. DIP switches are used to

configure the inputs for current sinking (active low) or current sourcing (active

high) operation.

The Setpoint Output can be assigned to the Timer or Counter value, and

configured to suit a variety of control and alarm requirements. The meter also

includes RS232 or RS485 serial communications.

SAFETY SUMMARY

All safety regulations, local codes and instructions that appear in this and

corresponding literature, or on equipment, must be observed to ensure personal

safety and to prevent damage to either the instrument or equipment connected to

it. If equipment is used in a manner not specified by the manufacturer, the

protection provided by the equipment may be impaired.

Do not use this unit to directly command motors, valves, or other actuators

not equipped with safeguards. To do so can be potentially harmful to persons or

equipment in the event of a fault to the unit.

The protective conductor terminal is bonded to conductive

parts of the equipment for safety purposes and must be

connected to an external protective earthing system.

SPECIFICATIONS

1. DISPLAY : 2.25" (57 mm) or 4" (101 mm) intensity adjustable Red LED

2. POWER REQUIREMENTS :

AC POWER: 50 to 250 VAC 50/60 Hz, 26 VA

DC POWER: 21.6 to 250 VDC, 11 W

DC Out: +24 VDC @ 100 mA if input voltage is greater than 50 VAC/VDC

+24 VDC @ 50 mA if input voltage is less than 50 VDC

Isolation: 2300 V RMS for 1 min. to all inputs and outputs

3. TIMER DISPLAY : 6-digits

Display Range: 0 to 999999

Overflow/Underflow Indication: Display flashes “ ?? ???? ”

Minimum Digit Resolution: 0.001 Sec.

Maximum Single Digit Resolution: 1 Hr.

Timing Accuracy: ±0.01%

CAUTION: Risk of Danger.

Read complete instructions prior to

installation and operation of the unit.

CAUTION: Risk of electric shock.

4. CYCLE COUNTER DISPLAY : 5-digits, may be disabled if not used

Display Designator: “ ? ” to the left side of the display

Display Range: 0 to 99999

Overflow/Underflow Indication: Display flashes “ ?? ???? ”

DIMENSIONS In inches (mm)

PART

NUMBER

X (Length)

Y (Height)

Z (Center)

LD2T06P0 16 (406.4) 4 (101.6)

12 (304.8)

LD4T06P0 26 (660.4) 7.875 (200) 22 (558.8)

AIR PRESSURE STABILIZATION VENT

2.25

(57.15)

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式